Electrician wiring an outdoor panel and transfer switch on a brick home

Homeowner guide

Common Electrical Problems in Older Georgia Homes

Older homes in Gwinnett, north Fulton and DeKalb have great lots and character, and electrical systems built for a different era. Here are the problems we find most, and what each one means for you.

Fast callback

Tell us what’s going on. We’ll take it from there.

Fill out the form and we’ll call you back to talk through the job and set a time to come out. You’ll get a clear, written estimate before any work begins.

Rather talk now?(470) 686-6863

Get a Free Estimate

Tell us what you need. We’ll call you back to set up a time.

Prefer to talk? Call (470) 686-6863. Read our reviews.

Why older homes have electrical issues

A home built in 1975 was wired for the appliances of 1975. Since then, the average home has added central air, more kitchen appliances, home offices, entertainment systems and now EV chargers. Older wiring and panels can also wear out, and past owners may have made changes that are not up to code. If your home was built before 1990, especially before 1970, there is a good chance at least one of these applies.

1. Outdated or undersized panels

Older homes often have 100-amp or smaller panels that are now full. Two brands in particular, Federal Pacific Electric (FPE) Stab-Lok and Zinsco, have long-standing concerns about breakers that may not trip when they should. Many inspectors and insurers flag them. If you have one, have it evaluated. See panel upgrades.

2. Aluminum branch wiring

From the late 1960s into the 1970s, some homes were wired with aluminum instead of copper. Aluminum expands and contracts more with heat, which can loosen connections at outlets and switches over time. Loose connections create heat. Fixes range from approved connectors at each device to rewiring affected circuits.

3. Missing grounds and two-prong outlets

Two-prong outlets usually mean there is no ground on the circuit. That limits surge protection and increases shock risk. Swapping in a three-prong outlet without a ground does not fix it. The fix is adding a ground or GFCI protection. One of our customers had no grounding anywhere in the house. Adding it was one of the best safety upgrades they could make.

4. Knob-and-tube and cloth wiring

Homes built before about 1950, more common in older Atlanta and Marietta neighborhoods, may have knob-and-tube wiring. It has no ground, the insulation can become brittle, and later additions are often unsafe. Many insurers ask about it.

5. Missing GFCI and AFCI protection

GFCI protection near water and AFCI protection against arcing were not required when many older homes were built. Adding them is affordable and makes a real difference.

6. Overloaded circuits and DIY work

Extension cords used as permanent wiring, splices without boxes, and breakers that are too large for their wire are common finds. Each one is a fire risk.

Warning signs to watch for

  • Breakers that trip often
  • Lights that flicker or dim
  • Warm outlets, switches or cover plates
  • A burning smell or buzzing
  • Outlets that do not hold a plug

What to do

Start with an electrical inspection. You will get a clear picture of what needs attention now and what can wait. From there, we can handle rewiring, repairs or a panel upgrade. Call (470) 686-6863.

From our Google reviews

What homeowners say

Safety first recently installed a new service panel, meter base with a external disconnect for my shop, and a generator hookup for outages. From the first phone contact, until the last visit from Raul, the customer service from him and the office staff set a new standard in customer service and professionalism. They…

Scott Newcomb · Google review

Raul and King were definitely professional and they made me feel safe about the work they were doing. Although it was a little out of my price range, I wanted good work and someone to know what they were doing and it had to be done. Raul worked to make sure I felt good about the pricing as well by giving me options.…

Lisa Boyd · Google review

Arkeem arrived right on time and was very professional through our service call. He explained the service work to be completed and answered all of my questions throughout the process. All of the requested work was completed in a reasonable amount of time. I felt very happy with the work performed and will use Safety…

Ian Shanley · Google review

Read more on our customer reviews page or on Google.

Reviews

What our customers say

See all reviews on Google

How it works

Four steps from call to power on

  1. 1

    Reach out

    Call (470) 686-6863 or send the short form. Tell us what’s going on.

  2. 2

    We take a look

    An electrician checks the problem or the project in person and answers your questions.

  3. 3

    Clear estimate

    You get a written price before any work begins. No surprise charges.

  4. 4

    Safe, clean work

    We do the job to code, test it, and walk you through what we did.

Questions

Questions we hear about this

How do I know if my home has aluminum wiring?

Look for "aluminum" or "AL" printed on cable jackets in an unfinished basement or attic, or have an electrician check.

Is it safe to replace a two-prong outlet with a three-prong one?

Not without adding a ground or GFCI protection. A three-prong outlet with no ground gives a false sense of safety.

Should I replace a Federal Pacific or Zinsco panel?

Many electricians recommend it because of long-standing concerns about breaker performance. Have it evaluated.

More answers on our electrical FAQ page, or contact our team with your question.

Questions about your home? Call us.

Call (470) 686-6863 or request a free estimate. We serve Peachtree Corners and north metro Atlanta.

Get a Free Estimate