Generator Installation · Johns Creek, GA
Generator Installation in Johns Creek, GA
Safety 1st Electrical Services installs whole-home and essential-circuit standby generators with automatic transfer switches for Johns Creek homes. Call (470) 686-6863 or request a free estimate.
- Written estimate before work starts
- Local office on Peachtree Corners Circle
- 5.0-star Google rating
Illustrative video
Fast callback
Tell us what’s going on. We’ll take it from there.
Fill out the form and we’ll call you back to talk through the job and set a time to come out. You’ll get a clear, written estimate before any work begins.
Rather talk now?(470) 686-6863Get a Free Estimate
Tell us what you need. We’ll call you back to set up a time.
- Written estimatesYou see the price before we start.
- Code-focused workWired to Georgia electrical code.
- Based in 30092Close by when you need us.
- 18 cities servedAcross north metro Atlanta.
Standby power for Johns Creek homes
Johns Creek's wooded neighborhoods near the Chattahoochee look great until a storm brings trees down on the lines. For larger homes with multiple HVAC systems, finished basements and home offices, a few hours without power is a real disruption. A standby generator with an automatic transfer switch handles it without you lifting a finger.
Whole-home or essential circuits
A whole-home system runs nearly everything, including central air. An essential-circuit system covers the fridge, lights, internet, a furnace fan and sump pump at a lower cost. We help you decide based on what matters to you.
Planning the install
- Load calculation and generator sizing
- Placement that meets code clearances and works with your HOA
- Automatic transfer switch at or near your panel
- Coordination for the gas connection, which may involve a licensed gas contractor
- Testing and a walk-through of how it works
If your panel is original or full, a panel upgrade in Johns Creek can be done at the same time.
Portable option
If a standby system is more than you need, a portable generator hookup with an interlock is a lower-cost safe alternative.
More for Johns Creek
See our Johns Creek electrician page, our main generator installation page, generator installation in Duluth, or our transfer switch troubleshooting guide.
Planning a whole-home system
Whole-home backup means the generator can run nearly everything, including multiple HVAC systems. The automatic transfer switch is sized for your service, and in some setups load-shedding modules turn off large loads like a second AC unit while others run. That keeps the generator size reasonable.
Sound and placement
Standby generators make noise when running and during weekly self-tests. We place them with code clearances in mind, away from bedroom windows where possible, and in a spot your HOA will approve.
Permits
Generator and transfer switch installs typically need permits, generally through the City of Johns Creek for homes inside city limits.
What affects the cost
- Generator size and fuel type
- Whole-home or essential-circuit transfer switch
- Load-shedding modules
- Distance to the panel and gas supply
- Panel condition
Maintenance
Plan for periodic oil, filter and battery service. A maintained generator starts when you need it.
Step by step
- Load calculation and sizing
- Placement plan and HOA submission details
- Pad and generator set
- Automatic transfer switch and wiring
- Fuel connection by the appropriate contractor
- Testing and walkthrough
Medical and home office needs
If anyone relies on medical equipment or works from home, include those circuits in the plan.
Long-term care
Keep up with maintenance and watch the controller display for warnings.
Common Johns Creek generator questions
Can a standby generator run two or three AC units? Yes, if sized for it or paired with load-shedding modules. Will it start if I am away? Yes. The automatic transfer switch starts it and transfers power without anyone home. How long does it run? On natural gas, as long as gas service continues, with periodic checks. What about the weekly self-test? Most generators run a short test on a schedule you can set, so it does not run at inconvenient times. We set it up during the walkthrough.
What affects the cost in Johns Creek
- Generator size for whole-home or essential circuits
- Automatic transfer switch size and type
- Load-shedding modules for multiple HVAC systems
- Distance from the generator pad to the panel and gas meter
- Panel condition, and whether a panel upgrade is part of the plan
- HOA placement and screening requirements
You get a written estimate after we visit, look at your panel and gas service, and talk through what you want to keep running. For homes on propane, tank size and placement are part of the plan.
Many Johns Creek families work from home, care for relatives or simply do not want to lose a freezer full of food. Whatever your reason, we size the system to your needs, plan placement for your HOA, and walk you through how it works before we leave.
Call (470) 686-6863 to schedule a site visit for your Johns Creek standby generator and get a written estimate. We can also provide the details your HOA asks for, including size, placement and sound.
Related services
More electrical services in Johns Creek
See everything we do on our Johns Creek electrician page or all services.
-
Electrical Repairs
Dead outlets, flickering lights, warm switch plates and tripping breakers, traced to the cause and fixed.
Electrical Repairs in Johns Creek -
Panel Upgrades
More capacity and dependable breakers for HVAC, kitchens, EV chargers and additions.
Panel Upgrades in Johns Creek -
EV Charger Installation
Level 2 home charging in garages and driveways, with a panel load check first.
EV Charger Installation in Johns Creek -
Circuit Breaker Services
Breakers that trip, buzz, run hot or will not reset, plus new circuits and AFCI/GFCI breakers.
About circuit breaker services -
Wiring & Rewiring
New circuits for remodels and additions, and rewiring for homes with worn or outdated wire.
About wiring & rewiring -
Lighting Installation
Recessed lights, pendants, chandeliers, ceiling fans and under-cabinet lighting.
About lighting installation
From our Google reviews
From our Google reviews
Safety first recently installed a new service panel, meter base with a external disconnect for my shop, and a generator hookup for outages. From the first phone contact, until the last visit from Raul, the customer service from him and the office staff set a new standard in customer service and professionalism. They…
Arkeem arrived right on time and was very professional through our service call. He explained the service work to be completed and answered all of my questions throughout the process. All of the requested work was completed in a reasonable amount of time. I felt very happy with the work performed and will use Safety…
Raul should rename company from safety first to first class electrician. Had him out today to install a motion detector, dimmer switch and a ring camera. He was quick to quote, extremely personable and knowledgeable thinking of all potential outcomes before engaging in any work. He was a step ahead of the game. My home…
Read more on our customer reviews page or on Google.
Reviews
What our customers say
5.0-Star Google Rating
Rated 5.0 out of 5 across 107 Google reviews from homeowners and business owners.
18 Cities Served
From our base in Peachtree Corners we cover Gwinnett, north Fulton, DeKalb, Forsyth and Cobb. See every city on our service areas page.
Local Office in 30092
We work out of 5051 Peachtree Corners Circle, Ste 200 in Peachtree Corners, close by for homes and businesses from Neely Farm to Technology Parkway.
How it works
Four steps from call to power on
- 1
Reach out
Call (470) 686-6863 or send the short form. Tell us what’s going on.
- 2
We take a look
An electrician checks the problem or the project in person and answers your questions.
- 3
Clear estimate
You get a written price before any work begins. No surprise charges.
- 4
Safe, clean work
We do the job to code, test it, and walk you through what we did.
Questions
Generator Installation in Johns Creek: FAQ
How big a generator does a Johns Creek home need?
It depends on your home and what you want to run. Whole-home backup with central air needs more capacity than essential circuits. We size from a load calculation.
Will my HOA approve a standby generator?
Many do with an application. We can provide size, placement and sound information.
How quickly does a standby generator turn on?
Usually within seconds of an outage, through the automatic transfer switch.
Do standby generators need service?
Yes. They run self-tests and need periodic oil, filter and battery service like any engine.
Do you give written estimates?
Yes. You get a written estimate before any work begins.
What is load shedding?
Modules that turn off large loads, like a second AC unit, when the generator needs capacity for other circuits.
How loud is a standby generator?
It makes noise when running and during self-tests. We place it with clearances and neighbors in mind.
Do generator installs in Johns Creek need a permit?
Typically, yes. We tell you what your job needs.
Can you provide details for my HOA application?
Yes. We provide size, placement and sound information.
How often does a standby generator need service?
Follow the manual. Oil, filter and battery service are typical.
How long does a Johns Creek standby install take?
The electrical installation is usually a day or two once the generator and transfer switch are on site. Permits, HOA approval, gas work and inspection affect the overall timeline.
Can a generator run my pool equipment?
Yes, if sized for it. Many homeowners choose to leave pool equipment off during outages to save capacity for HVAC and essentials.
More answers on our electrical FAQ page, or contact our team with your question.
Service area
Generator Installation near Johns Creek
We provide generator installation in Johns Creek and the cities around it.
Generator Installation in Johns Creek, GA
Call (470) 686-6863 or request a free estimate for generator installation in Johns Creek.