Electrician working at a generator transfer switch panel on a brick home

How-to

Generator Not Switching Over Automatically? Here’s What to Check

A standby generator is supposed to take over on its own when the power goes out. When the automatic transfer switch does not do its job, here is what is happening and what you can safely check.

Fast callback

Tell us what’s going on. We’ll take it from there.

Fill out the form and we’ll call you back to talk through the job and set a time to come out. You’ll get a clear, written estimate before any work begins.

Rather talk now?(470) 686-6863

Get a Free Estimate

Tell us what you need. We’ll call you back to set up a time.

Prefer to talk? Call (470) 686-6863. Read our reviews.

Safety first: transfer switches and generator wiring carry dangerous voltage. If you are not comfortable, stop and call a licensed electrician. Never open covers on live equipment.

What an automatic transfer switch does

An automatic transfer switch (ATS) watches utility power. When power drops, it signals the generator to start, waits for it to stabilize, then switches your home from the grid to the generator. When utility power returns, it switches back and lets the generator cool down and shut off. When it works, you barely notice the outage.

Common reasons it does not switch over

  • The generator is not in Auto. After maintenance or a test, the controller may have been left in Off or Manual.
  • A tripped generator breaker. The main breaker on the generator itself may be off or tripped.
  • A dead or weak battery. Standby generators use a starting battery, and it wears out every few years.
  • A fault code. Low oil, overcrank or overspeed faults stop the generator from running until cleared.
  • Fuel supply problems. A closed gas valve or low propane.
  • A transfer switch or control problem. Failed relays, loose control wiring or a failed controller board.

What you can safely check

  1. Look at the generator controller display. Is it set to Auto? Is there a fault message? Write down any code.
  2. Check that the generator's main breaker is on.
  3. Make sure the fuel valve is open and, for propane, that the tank has fuel.
  4. If the controller shows a battery warning, the battery may need replacement.

Follow your owner's manual for clearing faults and for any manual transfer procedure. Many systems have a specific sequence that protects the equipment and your appliances.

When to call an electrician

Call if the generator runs but the house does not switch over, if faults keep returning, if you hear buzzing or smell burning at the transfer switch, or if you are not sure what you are looking at. Transfer switch and control wiring problems need a professional.

Prevent the next failure

Keep up with the maintenance schedule in your manual: oil, filters and battery. Let the weekly self-test run, and look at the display now and then. A generator that is properly sized and installed with a quality transfer switch has far fewer problems. See our generator installation service, or call (470) 686-6863.

From our Google reviews

What homeowners say

Safety first recently installed a new service panel, meter base with a external disconnect for my shop, and a generator hookup for outages. From the first phone contact, until the last visit from Raul, the customer service from him and the office staff set a new standard in customer service and professionalism. They…

Scott Newcomb · Google review

Arkeem arrived right on time and was very professional through our service call. He explained the service work to be completed and answered all of my questions throughout the process. All of the requested work was completed in a reasonable amount of time. I felt very happy with the work performed and will use Safety…

Ian Shanley · Google review

Raul should rename company from safety first to first class electrician. Had him out today to install a motion detector, dimmer switch and a ring camera. He was quick to quote, extremely personable and knowledgeable thinking of all potential outcomes before engaging in any work. He was a step ahead of the game. My home…

Natalie Hebert · Google review

Read more on our customer reviews page or on Google.

Reviews

What our customers say

See all reviews on Google

How it works

Four steps from call to power on

  1. 1

    Reach out

    Call (470) 686-6863 or send the short form. Tell us what’s going on.

  2. 2

    We take a look

    An electrician checks the problem or the project in person and answers your questions.

  3. 3

    Clear estimate

    You get a written price before any work begins. No surprise charges.

  4. 4

    Safe, clean work

    We do the job to code, test it, and walk you through what we did.

Questions

Questions we hear about this

Why does my generator run but the house has no power?

The transfer switch may not have transferred, or a breaker between the generator and the switch is off. Have an electrician check.

How often should a standby generator battery be replaced?

Every few years is common. Check your manual and watch for battery warnings on the controller.

Can I manually transfer to generator power?

Many systems allow it with a specific procedure in the owner’s manual. If you are unsure, call an electrician.

More answers on our electrical FAQ page, or contact our team with your question.

Questions about your home? Call us.

Call (470) 686-6863 or request a free estimate. We serve Peachtree Corners and north metro Atlanta.

Get a Free Estimate