Panel Upgrades · Roswell, GA
Panel Upgrades in Roswell, GA
Safety 1st Electrical Services replaces fuse boxes, flagged panels and full panels in Roswell homes, from the historic district to neighborhoods off Holcomb Bridge Road. Call (470) 686-6863 or request a free estimate.
- Written estimate before work starts
- Local office on Peachtree Corners Circle
- 5.0-star Google rating
Illustrative video
Fast callback
Tell us what’s going on. We’ll take it from there.
Fill out the form and we’ll call you back to talk through the job and set a time to come out. You’ll get a clear, written estimate before any work begins.
Rather talk now?(470) 686-6863Get a Free Estimate
Tell us what you need. We’ll call you back to set up a time.
- Written estimatesYou see the price before we start.
- Code-focused workWired to Georgia electrical code.
- Based in 30092Close by when you need us.
- 18 cities servedAcross north metro Atlanta.
Panel upgrades across Roswell
Roswell's homes range from historic houses near Canton Street to large neighborhoods from the 1970s through the 1990s. Older homes may still have fuse boxes or small services. Mid-era homes may have original panels, sometimes from brands that inspectors and insurers flag, such as Federal Pacific Stab-Lok or Zinsco. Homes from the 1980s and 1990s often have 150-amp or 200-amp panels that are now full after a basement finish, a pool or a second HVAC system. The right upgrade depends on what you have and what you plan to add.
Historic homes
In historic Roswell homes, a panel upgrade is often the first step in a larger plan to update wiring safely. A new panel gives you modern breakers, AFCI and GFCI protection where required, and room for new circuits as older ones are replaced. Exterior equipment changes in the historic district may need additional review, so we plan placement with that in mind.
Signs your Roswell panel needs attention
- Fuses, or a small service
- No open slots or double-tapped breakers
- Breakers that trip often, buzz or feel warm
- Rust, scorch marks or a burning smell
- A flagged brand on an inspection or insurance form
- Plans for an EV charger, generator, pool or remodel
How we upgrade
We start with a load check that includes your plans, then give you a written estimate covering panel size, service changes, permits and utility coordination. On install day, power is off for part of the day while we replace the panel, move circuits to new breakers, correct issues like double taps and missing grounds, add AFCI and GFCI protection where code requires, and label every circuit. We test and walk you through it before we leave.
A typical upgrade day
We confirm the plan, shut off power and, if the service is changing, coordinate with the utility. We remove the old panel, install the new one, terminate each circuit, label everything and restore power. In older homes, we note any circuits that should be updated next and include them in a follow-up plan if you want one.
Permits
Panel upgrades typically need a permit and inspection, generally through the City of Roswell for homes inside city limits. Historic district properties may have additional review for exterior equipment.
What affects the cost
- Fuse box replacement, same-size swap or larger service
- Panel location and access in older homes
- Number of circuits and corrections needed
- AFCI and GFCI breakers required by code
- Meter base and service cable condition
- Surge protection add-on
Common questions
Will a new panel fix knob-and-tube? No. It gives you modern breakers and capacity, but old wiring needs its own replacement plan. Will it raise my bill? No. Capacity does not change usage. Can I stay home? Yes, with power off for part of the day.
More for Roswell
See our Roswell electrician page, electrical repairs in Roswell, our main panel upgrades page, or nearby panel upgrades in Sandy Springs. Call (470) 686-6863 to schedule a load check.
Planning ahead for Roswell renovations
Many Roswell owners upgrade a panel because a bigger project is coming: a finished basement, a kitchen remodel, an addition, a pool or an EV. Each one adds circuits. If you know a project is coming in the next few years, tell us. We will size the panel and leave spaces so the next project does not need another trip back to the panel.
Surge protection
Roswell's wooded streets see their share of summer storms. A whole-home surge protector at the panel helps protect HVAC equipment, appliances and electronics from surges that come in on the service. It works best paired with point-of-use protection for computers and TVs.
Related services
More electrical services in Roswell
See everything we do on our Roswell electrician page or all services.
-
Electrical Repairs
Dead outlets, flickering lights, warm switch plates and tripping breakers, traced to the cause and fixed.
Electrical Repairs in Roswell -
EV Charger Installation
Level 2 home charging in garages and driveways, with a panel load check first.
EV Charger Installation in Roswell -
Generator Installation
Standby generators and portable generator hookups with a transfer switch or interlock.
Generator Installation in Roswell -
Circuit Breaker Services
Breakers that trip, buzz, run hot or will not reset, plus new circuits and AFCI/GFCI breakers.
About circuit breaker services -
Wiring & Rewiring
New circuits for remodels and additions, and rewiring for homes with worn or outdated wire.
About wiring & rewiring -
Lighting Installation
Recessed lights, pendants, chandeliers, ceiling fans and under-cabinet lighting.
About lighting installation
From our Google reviews
From our Google reviews
Safety first recently installed a new service panel, meter base with a external disconnect for my shop, and a generator hookup for outages. From the first phone contact, until the last visit from Raul, the customer service from him and the office staff set a new standard in customer service and professionalism. They…
Called in the morning and we had an appointment later that day .. excellent service ..very patient and thorough…..we had electrical and breaker issues .thank u Sergio
Raul and King were definitely professional and they made me feel safe about the work they were doing. Although it was a little out of my price range, I wanted good work and someone to know what they were doing and it had to be done. Raul worked to make sure I felt good about the pricing as well by giving me options.…
Read more on our customer reviews page or on Google.
Reviews
What our customers say
5.0-Star Google Rating
Rated 5.0 out of 5 across 107 Google reviews from homeowners and business owners.
18 Cities Served
From our base in Peachtree Corners we cover Gwinnett, north Fulton, DeKalb, Forsyth and Cobb. See every city on our service areas page.
Local Office in 30092
We work out of 5051 Peachtree Corners Circle, Ste 200 in Peachtree Corners, close by for homes and businesses from Neely Farm to Technology Parkway.
How it works
Four steps from call to power on
- 1
Reach out
Call (470) 686-6863 or send the short form. Tell us what’s going on.
- 2
We take a look
An electrician checks the problem or the project in person and answers your questions.
- 3
Clear estimate
You get a written price before any work begins. No surprise charges.
- 4
Safe, clean work
We do the job to code, test it, and walk you through what we did.
Questions
Panel Upgrades in Roswell: FAQ
Can you replace a fuse box in an older Roswell home?
Yes. We replace fuse boxes with modern breaker panels, label every circuit and point out any older wiring that should be updated next.
Should I replace a Federal Pacific or Zinsco panel?
Many electricians recommend it because of long-standing concerns about breaker performance. We can evaluate yours and give you a written price.
Do panel upgrades in the historic district need extra approval?
Interior panel work follows normal permitting. Exterior equipment changes may have additional review, so we plan placement with that in mind.
Does a panel upgrade need a permit in Roswell?
Typically, yes, generally through the City of Roswell for homes inside city limits.
How long does a panel upgrade take?
Most are done in a day with power off for part of it. Service upgrades with utility coordination can add scheduling time.
Do I need 200 amps?
A load check based on your home and plans decides. Many Roswell homes do well at 200 amps.
Will a new panel fix my old wiring?
No. It adds modern breakers and capacity. Old wiring needs its own plan.
Can I add an EV charger at the same time?
Yes. Doing both together usually saves money and gives a cleaner layout.
Should I add surge protection?
It is a smart add-on that helps protect HVAC equipment, appliances and electronics.
Do you give written estimates?
Yes. You get a written estimate before any work begins.
Should I upgrade my panel before a Roswell basement finish?
If the load calculation shows your panel is full or near capacity, yes. Doing it before the basement work avoids paying for two rounds of panel changes.
Do I need surge protection with a new panel?
It is optional, but a whole-home surge protector is a smart add-on, especially for homes with several HVAC systems and a lot of electronics.
Will a new panel fix flickering lights in my Roswell home?
Sometimes. Flicker can come from a worn panel bus, loose service connections or a single bad device. We test to find the cause before recommending a panel change, so you only pay for what fixes it.
How long does a panel upgrade take in Roswell?
The work itself usually takes most of one day, with power off for part of it. Service changes depend on utility scheduling, which we coordinate.
More answers on our electrical FAQ page, or contact our team with your question.
Service area
Panel Upgrades near Roswell
We provide panel upgrades in Roswell and the cities around it.
Panel Upgrades in Roswell, GA
Call (470) 686-6863 or request a free estimate for panel upgrades in Roswell.