Generator Installation · Roswell, GA
Generator Installation in Roswell, GA
Safety 1st Electrical Services installs standby generators and portable generator hookups for Roswell homes on wooded lots and creek valleys that lose power in storms. Call (470) 686-6863 or request a free estimate.
- Written estimate before work starts
- Local office on Peachtree Corners Circle
- 5.0-star Google rating
Illustrative video
Fast callback
Tell us what’s going on. We’ll take it from there.
Fill out the form and we’ll call you back to talk through the job and set a time to come out. You’ll get a clear, written estimate before any work begins.
Rather talk now?(470) 686-6863Get a Free Estimate
Tell us what you need. We’ll call you back to set up a time.
- Written estimatesYou see the price before we start.
- Code-focused workWired to Georgia electrical code.
- Based in 30092Close by when you need us.
- 18 cities servedAcross north metro Atlanta.
Why Roswell homeowners want backup power
Roswell's wooded streets, large lots and creek valleys around Vickery Creek and the Chattahoochee are beautiful until a storm brings limbs down on the lines. Some homes in the northern parts of the city rely on well pumps, which means an outage also stops your water. A generator with a proper transfer setup keeps water, refrigeration, heat or AC, internet and medical equipment running.
Portable generator hookups
We install an outdoor power inlet and an interlock kit or manual transfer switch at your panel. During an outage, you roll out the generator, plug it in and turn on the circuits you chose. It is the most affordable safe setup and works well for essentials. Interlock kits must be listed for your panel. Older panels may need a manual transfer switch.
Standby generators
A standby generator on a pad runs on natural gas or propane and starts automatically through an automatic transfer switch. It can run essentials or the whole house. For larger homes with multiple HVAC systems, load-shedding modules keep the generator size reasonable.
Well pumps
Well pumps have a high starting load. If your Roswell home has one, we size the generator and transfer setup to start it reliably, and we include the pump circuit in the plan.
Historic district homes
Standby generators are exterior equipment. In the historic district, placement may need additional review. We plan locations that meet code clearances and are as unobtrusive as possible.
A typical standby install
After a load calculation and placement plan, the pad is set and the generator placed. We install the automatic transfer switch, run wiring between the generator, switch and panel, and the gas connection is completed by the appropriate contractor. After inspection, we test a simulated outage, set the self-test schedule and walk you through the controller.
Permits
Generator and transfer switch installs typically need permits, generally through the City of Roswell for homes inside city limits.
What affects the cost
- Portable hookup or standby
- Generator size, including well pump starting loads
- Transfer switch type and load-shedding modules
- Distance to the panel and gas supply
- Placement on sloped or wooded lots
Safety
A portable generator belongs in the open yard, not under a deck, in the garage or near a window. Put battery-backed carbon monoxide alarms on each floor. And never connect a generator by plugging it into a wall outlet, because that pushes power back onto the street lines.
More for Roswell
See our Roswell electrician page, our main generator installation page, nearby generator installation in Johns Creek, or our transfer switch troubleshooting guide. Call (470) 686-6863 to schedule a site visit.
Choosing between portable and standby
A portable hookup suits owners who are home during outages and want to keep the fridge, some lights and a few outlets going. A standby generator suits owners who travel, work from home, have medical equipment or want air conditioning during summer outages. Both are safe when connected through a proper transfer device.
Sizing a generator
We list what you want to run and add the running and starting loads. Air conditioners, well pumps and electric ranges draw the most, especially at start-up. A load calculation keeps you from buying a generator too small to start the AC, or larger and pricier than you need.
Placement on wooded lots
Generators must sit outside with set clearances from doors, windows and vents. On wooded Roswell lots we also look at slopes, drainage and access for service, and we keep the unit away from where falling limbs are likely.
Related services
More electrical services in Roswell
See everything we do on our Roswell electrician page or all services.
-
Electrical Repairs
Dead outlets, flickering lights, warm switch plates and tripping breakers, traced to the cause and fixed.
Electrical Repairs in Roswell -
Panel Upgrades
More capacity and dependable breakers for HVAC, kitchens, EV chargers and additions.
Panel Upgrades in Roswell -
EV Charger Installation
Level 2 home charging in garages and driveways, with a panel load check first.
EV Charger Installation in Roswell -
Circuit Breaker Services
Breakers that trip, buzz, run hot or will not reset, plus new circuits and AFCI/GFCI breakers.
About circuit breaker services -
Wiring & Rewiring
New circuits for remodels and additions, and rewiring for homes with worn or outdated wire.
About wiring & rewiring -
Lighting Installation
Recessed lights, pendants, chandeliers, ceiling fans and under-cabinet lighting.
About lighting installation
From our Google reviews
From our Google reviews
Safety first recently installed a new service panel, meter base with a external disconnect for my shop, and a generator hookup for outages. From the first phone contact, until the last visit from Raul, the customer service from him and the office staff set a new standard in customer service and professionalism. They…
Arkeem arrived right on time and was very professional through our service call. He explained the service work to be completed and answered all of my questions throughout the process. All of the requested work was completed in a reasonable amount of time. I felt very happy with the work performed and will use Safety…
Raul should rename company from safety first to first class electrician. Had him out today to install a motion detector, dimmer switch and a ring camera. He was quick to quote, extremely personable and knowledgeable thinking of all potential outcomes before engaging in any work. He was a step ahead of the game. My home…
Read more on our customer reviews page or on Google.
Reviews
What our customers say
5.0-Star Google Rating
Rated 5.0 out of 5 across 107 Google reviews from homeowners and business owners.
18 Cities Served
From our base in Peachtree Corners we cover Gwinnett, north Fulton, DeKalb, Forsyth and Cobb. See every city on our service areas page.
Local Office in 30092
We work out of 5051 Peachtree Corners Circle, Ste 200 in Peachtree Corners, close by for homes and businesses from Neely Farm to Technology Parkway.
How it works
Four steps from call to power on
- 1
Reach out
Call (470) 686-6863 or send the short form. Tell us what’s going on.
- 2
We take a look
An electrician checks the problem or the project in person and answers your questions.
- 3
Clear estimate
You get a written price before any work begins. No surprise charges.
- 4
Safe, clean work
We do the job to code, test it, and walk you through what we did.
Questions
Generator Installation in Roswell: FAQ
Can a generator run my well pump in Roswell?
Yes, if it is sized for the pump’s starting load and the circuit is part of the transfer setup. We plan for it from the start.
Can I put a standby generator at a historic district home?
Often, yes, with placement that meets code and any additional review for exterior equipment in the district.
What is load shedding?
Modules that turn off large loads, like a second AC unit, when the generator needs capacity for other circuits.
Does an interlock work with my panel?
Only if one is listed for your panel. Older panels may need a manual transfer switch.
Do generator installs need a permit in Roswell?
Typically, yes, generally through the City of Roswell.
Who connects the gas?
Gas work may involve a licensed gas contractor. We explain who does what in the estimate.
How long can a standby generator run?
On natural gas, as long as gas service continues, with periodic checks. On propane, it depends on tank size and load.
Is it safe to run a generator in the garage?
No. Generators produce carbon monoxide. Run them outside, away from openings.
Can I start with a portable hookup and upgrade later?
Yes. We plan the panel so moving to standby later is straightforward.
Do you give written estimates?
Yes. You get a written estimate before any work begins.
How big of a generator do I need for my Roswell home?
It depends on what you want to run. A load calculation adds up running and starting loads so the generator can start your AC without being oversized.
Natural gas or propane?
If you have a gas meter, natural gas gives an ongoing supply. Propane needs a tank sized for how long you want to run.
Can I start with a portable generator hookup and add standby later?
Yes. Many Roswell owners start with an inlet and interlock for a portable generator. We plan the panel so moving to a standby unit with an automatic transfer switch later is a simple step.
Will my HOA allow a standby generator in Roswell?
Many HOAs allow them with approval. We can provide the unit size, placement plan and sound information you need for the application.
What maintenance does a standby generator need?
Periodic oil, filter and battery service, plus checking the controller for warnings. Most owners schedule service once a year or after heavy use.
More answers on our electrical FAQ page, or contact our team with your question.
Service area
Generator Installation near Roswell
We provide generator installation in Roswell and the cities around it.
Generator Installation in Roswell, GA
Call (470) 686-6863 or request a free estimate for generator installation in Roswell.