Panel Upgrades · Atlanta, GA
Panel Upgrades in Atlanta, GA
Safety 1st Electrical Services replaces fuse boxes, small services and flagged panels in north Atlanta homes, and upgrades newer homes adding EVs, generators and renovations. Call (470) 686-6863 or request a free estimate.
- Written estimate before work starts
- Local office on Peachtree Corners Circle
- 5.0-star Google rating
Illustrative video
Fast callback
Tell us what’s going on. We’ll take it from there.
Fill out the form and we’ll call you back to talk through the job and set a time to come out. You’ll get a clear, written estimate before any work begins.
Rather talk now?(470) 686-6863Get a Free Estimate
Tell us what you need. We’ll call you back to set up a time.
- Written estimatesYou see the price before we start.
- Code-focused workWired to Georgia electrical code.
- Based in 30092Close by when you need us.
- 18 cities servedAcross north metro Atlanta.
Why Atlanta homes need panel upgrades
Older north Atlanta homes were built with small services, sometimes 60 or 100 amps, and some still have fuse boxes or panels from brands that insurers and inspectors question. Those homes now run central AC, modern kitchens, laundry, home offices and often an EV. Newer homes and gut renovations in Buckhead have the opposite problem: plenty of capacity on paper but panels that fill up fast with kitchen, bath, HVAC and outdoor circuits.
Fuse boxes and older panels
A fuse box can work, but it is easy to put in the wrong size fuse, it has no AFCI or GFCI protection and many insurers will not cover a home that has one. Some older breaker panels have a history of breakers that do not trip when they should. Replacing either gives you modern breakers, proper grounding and bonding and room to grow.
Small services
If the home has 60- or 100-amp service, a load calculation usually shows it cannot support central AC, an electric range, a dryer and an EV at the same time. A service upgrade, typically to 200 amps, includes a new meter base, service entrance cable, panel and grounding. Georgia Power serves the City of Atlanta, and it will need to disconnect and reconnect the service, sometimes changing the service drop. We coordinate that.
Space versus capacity
Space is room for breakers. Capacity is how much power your service can deliver. A subpanel adds space but not capacity. A load calculation tells us which you need.
Signs it is time
- A fuse box, or fuses that blow often
- 60- or 100-amp service with central AC and modern appliances
- A panel brand flagged by an inspector or insurer
- Warm breakers, buzzing, corrosion or scorch marks
- Plans for a renovation, addition, EV charger or generator
Renovations and additions
Kitchen and bath remodels, additions and basement finishes need new circuits with current AFCI and GFCI protection. If the panel cannot take them, it should be upgraded before the walls close. We coordinate with your contractor on timing.
How we upgrade
We start with a load calculation that includes your plans. You get a written estimate covering the panel, service work, permit, inspection and utility coordination. On install day, power is off for part of the day while we replace equipment, move circuits to new breakers, correct grounding and bonding, add required protection and label everything. In older homes we also tell you about any circuits we find that need attention.
Planning with EV and generator work
If an EV charger or generator is coming, plan it with the panel. One design avoids paying for two rounds of work.
Surge protection
A whole-home surge protector at the panel helps protect HVAC, appliances and electronics. It costs less to add during an upgrade.
Permits in Atlanta
Homes inside the City of Atlanta go through the city for electrical permits. An Atlanta mailing address does not always mean the City of Atlanta, though. Some are in Sandy Springs, Brookhaven or unincorporated areas. If your home is in a designated historic district, exterior changes like a standby generator or an outdoor charger may also need design review. We check your address and tell you what applies.
What affects the cost
- Panel replacement or full service upgrade
- Meter base, service entrance and grounding work
- Older circuits that need attention when moved to the new panel
- Plaster walls and tight access
- Combining with renovation, EV or generator work
More for Atlanta
See our Atlanta electrician page, our main panel upgrades page, or the same service nearby in Sandy Springs and Dunwoody. Related Atlanta pages: electrical repairs, panel upgrades, EV charger installation and generator installation. Call (470) 686-6863 to schedule a visit.
A typical upgrade day
We arrive, confirm the plan and coordinate the disconnect with Georgia Power. We replace the meter base and service entrance if the service is changing, install the new panel, correct grounding and bonding, and move each circuit to a new breaker, testing as we go. In older homes, circuits sometimes come out of the old panel without labels or with old cloth-insulated wire. We trace and label them and tell you about any that need attention. Then power is restored, and we walk you through the new panel.
Aluminum branch wiring
Some homes from the mid-1960s to mid-1970s have aluminum branch circuit wiring. It needs connectors rated for aluminum at every device and splice. If we find it during an upgrade, we tell you and explain the options.
Related services
More electrical services in Atlanta
See everything we do on our Atlanta electrician page or all services.
-
Electrical Repairs
Dead outlets, flickering lights, warm switch plates and tripping breakers, traced to the cause and fixed.
Electrical Repairs in Atlanta -
EV Charger Installation
Level 2 home charging in garages and driveways, with a panel load check first.
EV Charger Installation in Atlanta -
Generator Installation
Standby generators and portable generator hookups with a transfer switch or interlock.
Generator Installation in Atlanta -
Circuit Breaker Services
Breakers that trip, buzz, run hot or will not reset, plus new circuits and AFCI/GFCI breakers.
About circuit breaker services -
Wiring & Rewiring
New circuits for remodels and additions, and rewiring for homes with worn or outdated wire.
About wiring & rewiring -
Lighting Installation
Recessed lights, pendants, chandeliers, ceiling fans and under-cabinet lighting.
About lighting installation
From our Google reviews
From our Google reviews
Safety first recently installed a new service panel, meter base with a external disconnect for my shop, and a generator hookup for outages. From the first phone contact, until the last visit from Raul, the customer service from him and the office staff set a new standard in customer service and professionalism. They…
Called in the morning and we had an appointment later that day .. excellent service ..very patient and thorough…..we had electrical and breaker issues .thank u Sergio
Raul and King were definitely professional and they made me feel safe about the work they were doing. Although it was a little out of my price range, I wanted good work and someone to know what they were doing and it had to be done. Raul worked to make sure I felt good about the pricing as well by giving me options.…
Read more on our customer reviews page or on Google.
Reviews
What our customers say
5.0-Star Google Rating
Rated 5.0 out of 5 across 107 Google reviews from homeowners and business owners.
18 Cities Served
From our base in Peachtree Corners we cover Gwinnett, north Fulton, DeKalb, Forsyth and Cobb. See every city on our service areas page.
Local Office in 30092
We work out of 5051 Peachtree Corners Circle, Ste 200 in Peachtree Corners, close by for homes and businesses from Neely Farm to Technology Parkway.
How it works
Four steps from call to power on
- 1
Reach out
Call (470) 686-6863 or send the short form. Tell us what’s going on.
- 2
We take a look
An electrician checks the problem or the project in person and answers your questions.
- 3
Clear estimate
You get a written price before any work begins. No surprise charges.
- 4
Safe, clean work
We do the job to code, test it, and walk you through what we did.
Questions
Panel Upgrades in Atlanta: FAQ
Should I replace the fuse box in my Atlanta home?
In most cases, yes. Fuse boxes lack modern protection, are easy to misuse and many insurers will not cover them.
Does my 100-amp service need an upgrade?
If you run central AC, an electric range, a dryer and want an EV, often yes. A load calculation decides.
Who supplies power in the City of Atlanta?
Georgia Power. We coordinate the disconnect and reconnect for any service change.
Should I upgrade before my kitchen remodel?
If the panel is full or the service is small, yes. Upgrade before the walls close.
What is the difference between space and capacity?
Space is room for breakers. Capacity is how much power your service can deliver.
Does a panel upgrade need a permit in Atlanta?
Yes. Homes in the City of Atlanta go through the city. We check your address.
How long is the power off?
Usually most of one day for a service upgrade, depending on utility scheduling.
Will my insurer accept a new panel?
Replacing a flagged panel or fuse box usually removes the concern. Ask your insurer what documentation it wants. We provide the permit and invoice.
Will you find problems with older circuits?
We test circuits as we move them and tell you about anything that needs attention.
Can you work with my contractor?
Yes. We coordinate timing with renovation contractors.
Will you label the new panel?
Yes. Every circuit is traced and labeled.
Do you give written estimates?
Yes. You get a written estimate before any work begins.
What if my Atlanta home has aluminum wiring?
Aluminum branch wiring needs connectors rated for aluminum at every device and splice. If we find it, we explain the options and costs.
More answers on our electrical FAQ page, or contact our team with your question.
Service area
Panel Upgrades near Atlanta
We provide panel upgrades in Atlanta and the cities around it.
Panel Upgrades in Atlanta, GA
Call (470) 686-6863 or request a free estimate for panel upgrades in Atlanta.