Panel Upgrades · Marietta, GA
Panel Upgrades in Marietta, GA
Safety 1st Electrical Services replaces fuse boxes, small services, weathered meter bases and full panels in Marietta homes, from the Square to East Cobb. Call (470) 686-6863 or request a free estimate.
- Written estimate before work starts
- Local office on Peachtree Corners Circle
- 5.0-star Google rating
Illustrative video
Fast callback
Tell us what’s going on. We’ll take it from there.
Fill out the form and we’ll call you back to talk through the job and set a time to come out. You’ll get a clear, written estimate before any work begins.
Rather talk now?(470) 686-6863Get a Free Estimate
Tell us what you need. We’ll call you back to set up a time.
- Written estimatesYou see the price before we start.
- Code-focused workWired to Georgia electrical code.
- Based in 30092Close by when you need us.
- 18 cities servedAcross north metro Atlanta.
Reasons Marietta homes need panel work
Marietta's older housing gives us more panel calls than most cities we serve. Historic homes may still have fuse boxes or 60-amp services. Mid-century homes may have panel brands that insurers ask about. Many homes from the 1970s and 1980s have exterior panels and meter bases that have rusted after decades in Georgia weather. And East Cobb homes that have added a pool, basement and EV are simply out of room.
Fuse boxes and older panels
A fuse box can still work, but it has no AFCI or GFCI protection, it is easy to install the wrong size fuse and many insurers will not write a policy on a home that has one. Some older breaker panels have a record of breakers that do not trip reliably. Replacing either gives you modern protection, proper grounding and bonding and space for new circuits.
Rusted meter bases and exterior panels
Exterior equipment takes rain, sun and heat for decades. Rust lets water into the connections, which causes heat, flicker and eventually failure. If we see corrosion, we recommend replacing the meter base and panel together, and we coordinate the disconnect with your utility.
Room versus power
A full panel and an overloaded service are different problems. Room means breaker spaces. Power means what the service can deliver. A load calculation shows which you have. A subpanel adds room. A service upgrade, often from 100 to 200 amps in older Marietta homes, adds power.
Signs it is time
- A fuse box, or fuses that blow often
- 60- or 100-amp service with central AC and modern appliances
- Rust on the meter base or panel
- A panel brand flagged by an inspector or insurer
- Warm breakers, buzzing or scorch marks
- Plans for an EV charger, generator, pool or remodel
Who your utility is
Marietta homes may get power from Georgia Power, Cobb EMC or the City of Marietta's own utility, depending on the address. Each has its own process for disconnecting and reconnecting a service. We find out who serves you and handle the coordination.
How we upgrade
We start with a load calculation that includes your plans. You get a written estimate covering the panel, meter base and service work, permit, inspection and utility coordination. On install day, power is off for part of the day. We replace the equipment, correct grounding and bonding, move each circuit to a new breaker, add required AFCI and GFCI protection and label everything. In older homes, we tell you about any circuits we find that need attention as we move them.
Planning with other projects
If an EV charger, a generator or a kitchen remodel is coming, plan it with the panel. One design avoids two rounds of work, and remodel circuits should be in place before walls close.
Surge protection
A whole-home surge protector at the panel helps protect HVAC, appliances and electronics. It is cheapest to add during the upgrade.
Permits in Marietta
Panel and service upgrades need a permit and inspection through either the City of Marietta or Cobb County, depending on where your home sits. We check and pull the permit.
What affects the cost
- Panel swap or full service upgrade
- Meter base replacement
- Grounding and bonding corrections
- Older circuits that need attention
- Combining with EV, generator or remodel work
More for Marietta
See our Marietta electrician page, our main panel upgrades page, or the same service nearby in Roswell, Sandy Springs and Atlanta. Related Marietta pages: electrical repairs, panel upgrades, EV charger installation and generator installation. Call (470) 686-6863 to schedule a visit.
Aluminum branch wiring
Some Marietta homes from the mid-1960s to mid-1970s have aluminum branch circuit wiring. When we move those circuits to a new panel, the terminations need breakers and connectors rated for aluminum. If we find it, we tell you and explain options for the rest of the house.
A typical upgrade day
We coordinate the disconnect with your utility, replace the meter base if needed, install the new panel, correct grounding and bonding, and move each circuit to a new breaker, testing as we go. Older circuits that come out unlabeled get traced and labeled. Then we restore power and walk you through it.
Related services
More electrical services in Marietta
See everything we do on our Marietta electrician page or all services.
-
Electrical Repairs
Dead outlets, flickering lights, warm switch plates and tripping breakers, traced to the cause and fixed.
Electrical Repairs in Marietta -
EV Charger Installation
Level 2 home charging in garages and driveways, with a panel load check first.
EV Charger Installation in Marietta -
Generator Installation
Standby generators and portable generator hookups with a transfer switch or interlock.
Generator Installation in Marietta -
Circuit Breaker Services
Breakers that trip, buzz, run hot or will not reset, plus new circuits and AFCI/GFCI breakers.
About circuit breaker services -
Wiring & Rewiring
New circuits for remodels and additions, and rewiring for homes with worn or outdated wire.
About wiring & rewiring -
Lighting Installation
Recessed lights, pendants, chandeliers, ceiling fans and under-cabinet lighting.
About lighting installation
From our Google reviews
From our Google reviews
Safety first recently installed a new service panel, meter base with a external disconnect for my shop, and a generator hookup for outages. From the first phone contact, until the last visit from Raul, the customer service from him and the office staff set a new standard in customer service and professionalism. They…
Called in the morning and we had an appointment later that day .. excellent service ..very patient and thorough…..we had electrical and breaker issues .thank u Sergio
Raul and King were definitely professional and they made me feel safe about the work they were doing. Although it was a little out of my price range, I wanted good work and someone to know what they were doing and it had to be done. Raul worked to make sure I felt good about the pricing as well by giving me options.…
Read more on our customer reviews page or on Google.
Reviews
What our customers say
5.0-Star Google Rating
Rated 5.0 out of 5 across 107 Google reviews from homeowners and business owners.
18 Cities Served
From our base in Peachtree Corners we cover Gwinnett, north Fulton, DeKalb, Forsyth and Cobb. See every city on our service areas page.
Local Office in 30092
We work out of 5051 Peachtree Corners Circle, Ste 200 in Peachtree Corners, close by for homes and businesses from Neely Farm to Technology Parkway.
How it works
Four steps from call to power on
- 1
Reach out
Call (470) 686-6863 or send the short form. Tell us what’s going on.
- 2
We take a look
An electrician checks the problem or the project in person and answers your questions.
- 3
Clear estimate
You get a written price before any work begins. No surprise charges.
- 4
Safe, clean work
We do the job to code, test it, and walk you through what we did.
Questions
Panel Upgrades in Marietta: FAQ
Should I replace the fuse box in my Marietta home?
In most cases, yes. It lacks modern protection, and many insurers will not cover it.
My meter base is rusty. Do I need a new one?
Often, yes. Rust lets water into connections. We usually replace the meter base and panel together.
Who supplies power to my Marietta home?
It depends on the address: Georgia Power, Cobb EMC or the City of Marietta utility. We confirm and coordinate.
Does my 100-amp service need an upgrade?
If you run central AC and modern appliances or want an EV, often yes. A load calculation decides.
What is the difference between room and power?
Room is breaker spaces. Power is what the service can deliver. A subpanel adds room but not power.
Does a panel upgrade need a permit?
Yes, through the City of Marietta or Cobb County depending on your address.
How long is the power off?
Usually most of one day for a service upgrade.
Will my insurer accept a new panel?
Replacing a flagged panel or fuse box usually resolves the concern. We provide the permit and invoice.
Should I upgrade before my kitchen remodel?
If the panel is full or the service is small, yes. Do it before walls close.
Will you find other problems?
We test circuits as we move them and tell you about anything that needs attention.
Will you label the new panel?
Yes. Every circuit is traced and labeled.
Do you give written estimates?
Yes. You get a written estimate before any work begins.
What if my Marietta home has aluminum wiring?
When we move those circuits, terminations need parts rated for aluminum. We tell you what we find and explain options for the rest of the house.
More answers on our electrical FAQ page, or contact our team with your question.
Service area
Panel Upgrades near Marietta
We provide panel upgrades in Marietta and the cities around it.
Panel Upgrades in Marietta, GA
Call (470) 686-6863 or request a free estimate for panel upgrades in Marietta.